OKS will make your work easier. With 150 quality products, the company has the right lubrication technology solution for virtually every individual case. Select suitable pastes, oils, greases, cleaners, dry lubricants, corrosion protection and maintenance products by sector or area of use.
Lubrication of parts subject to high levels of stress such as plain, roller and rod-end bearings, spindles and guideways
For highest effectiveness, carefully clean the lubrication point, for example with OKS 2610 or OKS 2611 universal cleaner. Before filling for first time, remove anticorrosion agent. Fill bearing such that all functional surfaces are certain of being greased. Fill normal bearings up to about 1/3 of the free space inside the bearing. Low-speed bearings (DN value below 50 000) and their housings should be filled completely. The bearing and machine manufacturer´s instructions should be observed. Subsequent lubrication at the lubrication nipples by grease gun or by automatic lubrication system. Assess the lubrication frequency and quantity on basis of service conditions. If old grease cannot be removed, restrict the quantity of grease so as to avoid overlubricating the bearing. If lubrication frequencies tend to be low, you should aim for a full grease change. Only mix with suitable lubricants.
You can send a direct message to OKS
BearingEXPO connects 40+ physical exhibitions in
various key industry segments
Ask us the product, service or
company that you are looking for